Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Riser

$24.99 - $32.99
This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky
$34.95
Just enough rise, and at the right width, Ritchey Trail Rizer is a heavy-duty performer at entry-level pricing. - Material: double-butted 6061 alloy - Width: 780mm - Rise: 20mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 385g
$39.95
An adventure bar from Ritchey. Extra wide with subtle rise and sweep, these bars are perfect for handling dodgy terrain while packing a week's worth of supplies. - 6061 alloy - Bar Clamp Diameter: 31.8mm - Width: 800mm - Rise: 30mm - Back Sweep: 27 degrees - Upsweep: 27 - Weight: 355g
$49.99
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°
$52.99
- Handlebar optimized for 19mm diameter bar ends - Exclusively fits smaller grips for optimal ergonomics. - 650mm Bar - Offers ample width for increased bar control. - 6061 Sand Blasted Aluminum - Requires 22.2 Shim Kit (170915-01) - Rise: 20mm - Handlebar Width: 650mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Handlebar Weight: 260g
$54.99
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°
$54.99
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design
$59.99 - $69.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
$68.99
A25Y Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components
$70.00
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°
$75.00
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9
$75.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
$79.90 - $89.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
$79.99
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight. Large and in charge Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup. Product details - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
$79.99 - $89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
$79.99
A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike
$84.99
- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics
$84.99
- The second version of the Fatbar has undergone a full structural re-design. - In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm. - Proven high grade 7050 T6 aluminium and variable gauge taperwall construction
$90.00
Intended for dirt jumping, and your trail or DH bike if you need the extra rise.
$94.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$98.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$99.00
- The original Chromag bar - Used from XC to DH, the OSX is Chromag's most versatile option - 31.8mm clamp Specs: - Rise: 25mm - Handlebar Width: 800mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Upsweep: 5 degrees - Backsweep: 8 degrees
$104.99
A25 Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components
$110.45
- The Fatbar has already gained cult status and is the handlebar of choice for World Cup downhill race teams and athletes. - Offers the ultimate combination of lightness, strength and durability
$114.99
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos
$160.00
Rise and shred. A lightweight carbon MTB riser bar born to rip. Where it thrives: In competition, challenging trails What it's built for: Precision, control, durability Highlights: - Carbon fiber construction - Lightweight - 780mm wide, 9 deg backsweep, 4 deg upsweep, 31.8 diameter
$160.00
Descend with confidence. 16% more compliant than our competitors, this enduro and gravity focused handlebar that doesn't forget about weight or compliance. Where it thrives: Challenging trails, down hills What it's built for: Stability, control, confidence Highlights: - Carbon fiber construction for compliance and weight savings - 800mm width, 35mm clamp size, 210g - 30mm rise, 8 degree backsweep, 5 degree upsweep
$164.99
An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks
$165.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
$176.95
- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
Page 1 of 2 Next page