This adapter spaces out the Steel Hitch allowing bike frames with hooded/tight rear dropouts to have hitch clearance. This adapter is also used in breezer style dropout applications for proper hitch installation.
These bobbins are made by the Robert Axle Project and are identical to the bobbins that came with your original BOB skewer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer. - Sold in pairs - Manufactured from 303 Stainless Steel - Includes stainless steel hardware for attaching to axle
Replacement safety flag for extra visibility.
The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop
$24.99 - $119.99
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
Thule's Internal Hub Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with an internally geared hub.
Burley's Classic Hitch makes a great replacement for lost or damaged hitches. This replacement hitch attaches to the trailer's tow bar and switches easily between traditional bike frames.
Burley’s Quick Hitch allows for tool-free installation to connect the Travoy to the bicycle seat post. Attaches and detaches for easy transitions between bikes.
Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.
Have fun, rinse, and repeat! The Burley Floor Mat catches all the dirt, sand, snacks, and mud for easy clean-up. - Easy removal for a quick clean-up
This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits. Features: - Coated 70D nylon fabric keeps cargo dry - High viz fabric with reflective detail to keep you safe while you ride - Draw string tensions fabric around cargo - Center strap with buckle wraps around back for a secure fit - Velcro frame mount for cover storage sack - Compatibility: 2010 – Current Travoy - Weight (lbs/kg): 0.31 / 0.14
At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
The Premium Seat Pad provides cushioning with an adjustable headrest to keep your little one comfortable and supported. The hand-washable padding is easily removed for cleaning. - Seat and shoulder strap padding - Headrest for added support - Removable and hand-washable - Includes: Seat Padding, Shoulder Strap Padding, & Headrest - Compatible with 2016-Current child trailers
A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC
$62.00 - $69.00
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.
Thule's Bike Trailer Thru-Axle Adapters replace your 12mm rear thru-axle to let you connect your bike trailer to the bicycle.
Thule's Thru-Axle Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with a rear thru-axle.
Soft and snuggly, the Baby Snuggler keeps your littlest traveler comfortable and secure when jogging, strolling, or biking. Recommended for children 6-24 months of age. Child should be at least one year old before biking in trailer (child must be able to sit upright unattended and hold his or her head up while wearing a bicycle helmet). For children less than one year old it is recommended to only use the Snuggler for strolling and jogging.
Classic roll-top design and heat-sealed seams make this spacious 75-liter dry bag totally waterproof. Constructed with 500D tarpaulin fabric that is both tough and lightweight. Includes shoulder strap and carry handles. - Capacity: 75 liters - Weight 2.62 lbs. - Shoulder strap and carry handle - Designed for Burley Coho XC and Flatbed bike trailers
Burley's Nomad Cargo Rack is made of lightweight, sturdy aluminum and mounts easily to your Nomad trailer (sold separately) so you can expand your carrying capacity and haul even more stuff on your journeys. Now there's no excuse to leave anything home!
Two roll-top, waterproof panniers keep gear dry and organized. Compatible with all 10mm rack bars and have a combined capacity of 22 liters. Bright colors and reflective patches provide increased visibility. Constructed with 500D waterproof tarpaulin with heat-sealed seams. - Waterproof - Compatible with 10mm rack bars - Large reflective patches - Easy-to-use carry handle - Combined weight: 2.09 lbs.
The Upper Market Bag is a smaller bag for transitioning from a shopping to a cycling experience. It features see-through mesh for easy viewing of what’s packed in the 22-liter space. Features: - 22-liter reusable shopping bag - Side cinch webbing to close bag top - Slim-fold profile with Velcro for easy storage on or off the trailer - Removable rigid bottom provides a stable platform for cargo - Stowable bag clips (4) for Travoy bike trailer connection - Quick-release buckles secure upper flap closure - Pocket-sized interior slip for locks or to keep smaller items organized - Exterior slip pocket with easy access for quick stops - Adjustable-length carry straps for varying heights - Durable lower tarpaulin fabric bottom for additional protection - Light loop for accessory lighting - Compatibility: 2010 – Current Travoy Specifications: - Volume (Liters): 22 - Weight (lbs/kg): 1.32 / 0.6
Take your Burley all over town with the 2-Wheel Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. Leveling springs keep the stroller grounded on uneven terrain. Get out and explore with added versatility. - Easy conversion from biking to strolling - Fully pivoting wheels provide optimal maneuverability - Wheels easily slide into the trailer mounts - Includes: 8-inch Stroller Wheels (2) & Wrist Tether - Compatible with: 2019 – D’Lite X, 2019 – D’Lite Single, 2019 – Cub X, 2019 – Encore X, 2007-Current – D’Lite, 2007-Current – Encore, 2007-2018 – Solo, & 2010-2018 – Cub
The Lower Market Bag is a large bag for transitioning from a shopping to a cycling experience. It features see-through mesh for easy viewing, while an open-top design allows for taller cargo and cinch webbing to secure your items. Features: - Side cinch webbing to close bag top - Adjustable-length shoulder strap for varying heights - Exterior slip pocket with easy access for quick stops - Pocket-sized interior slip for locks or to keep smaller items organized - Stowable bag clips (4) for Travoy bike trailer connection and seamless use on or off bike - Durable lower tarpaulin fabric bottom for additional protection - Removable rigid bottom provides a stable platform for cargo - Light loop for accessory lighting - Compatibility: 2010 – Current Travoy Specifications: - Volume (Liters): 40 - Weight (lbs/kg): 1.52 / 0.69
Burley's Stroller Kit easily converts Burley's child and pet trailers into strollers, making it possible to walk and jog with them. It includes a stroller wheel that folds up for convenience as well as a parking brake and wrist tether for security. • Stroller wheel stays attached and folds up out of the way when cycling • Tool-free adjustment makes switching from bike to stroll mode simple • Adjustable tracking makes for consistent, easy rolling • Burley's easy-glide tow bar retracts closer to the trailer for easy maneuverability • Stroller wheel pushes easily Compatible with: 2007-Current D'Lite 2007-Current Encore 2007-Current Solo 2007-Current Cub 2007-Current Honey Bee 2008-Current Tail Wagon
Take your furry friend all over town with the Tail Wagon Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. - Tool-free installation - Stroller wheels push easily - Compact footprint for maneuverability in tight spaces - Compatible with 2008 – current Tail Wagon models
Thule's Bicycle Trailer Kit easily converts your Thule Chariot carrier (sold separately) into a stable, sturdy bike trailer. With Thule's Axle Mount ezHitch system, attachment and removal are quick and easy. You even get a tall flag and reflector kit for enhanced visibility.
Page 1 of 2 Next page