Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Lighting

$2.95
Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.
$3.59
Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights
$3.59
Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.
$4.99
Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g
$4.99
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal
$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.
$9.95
Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
$9.99
If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems
$9.99
If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
$10.95
- Installs under the seat for a low profile, less cluttered appearance - Easy to install and stays secure in all terrain - Clamps to most two-rail bicycle saddles - Use with Cygolite Hypershot and Hotshot tail lights - Can also be used with GoPro compatible interface - Premium plastic for strong durability - Only weighs 23 grams - Less prone to scratching bikes compared to metal mounts - Tail light secures to mount without removing from saddle rails - Designed, engineered, and assembled in the USA
$11.88
Bracket for aero seatpost
$12.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$12.99
The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h
$13.95
Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.
$14.95
2nd generation Locktite™ tool-free handlebar bracket mount for Ranger, Expilion, Metro Pro and Plus, Metro, Streak and Pace systems. Compatible with 22 to 32mm diameter handlebars.
$14.99
Amber side safety lights that are as cute as a button The Button Blinky Amber safety side lights are the perfect way to complete 360 degrees of visibility on your bike. The strong rubber straps are designed to mount to multiple points on your bike, including your fork, stem, top tube, down tube, seat post and rear stays. The little lights have two modes and offer run times of up to 85 hours on replaceable CR2032 batteries. These little lights are brilliant, easy to mount, and cute as a button!
$14.99
Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!
$15.95
- Fits 25.4 to 35mm handlebars. - Wide range compatibility designed for standard and larger diameter handlebars. - Easy to install and stays secure in rough terrain. - Compatible lights: Ranger Endurance, Ranger, Metro Pro, Metro Plus, Metro, Streak - Durable and convenient. - Premium plastic for strong durability. - Quick release feature makes removing the light quick and easy. - Designed, engineered, and assembled in the USA to ensure top-quality mounts for your light.
$15.99
Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
$17.95
- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g
$17.95
- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 80 mm - Visible from the side - 40g
$19.99
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
$19.99
German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included
$19.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
$19.99
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series
$19.99
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Page 1 of 6 Next page