• Designed to keep dust and dirt out of V-Brake cable/housing systems
$1.00 - $36.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
Product details - Use in chainstay pocket to seal sensor into frame
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
Shimano Front Derailleur Cable Fixing Assembly
Strain relief for servicing RockShox Reverb hydraulic lines. - Fits all generations of Reverb
• Fits all Trek kids' bikes • Super-strong steel derailleur guard
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt
$4.00 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10
A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.
Keep the cable fixed securely in your Dura-Ace R9100 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
Keep the cable fixed securely in your XTR M9000 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
$5.99 - $15.99
- Quiets chain slap and protects chainstays from nicks and scratches - Standard protector fits most chainstays - Universal kits come with circle protectors to eliminate frame damage due to cable rub
The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.
$6.00 - $24.00
Flat Mount Disc Caliper Bracket Bolts
Need a spare Shimano cable adjuster assembly for your Dura-Ace R9100 rear derailleur? You've found it. Making sure this part is in working order can mean the difference between a two-second barrel twist to return your shifting to perfect, or getting out the multi-tool to readjust the cable again and again until it's close enough to get home. Your choice.
$6.50 - $6.75
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
- Length: 8 mm, 5.5 mm - Material: Steel - Type: Hex - Set of 4 x 2
Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes
• For use with externally routed road frames
This replacement Shimano bar-end shifter segment unit is the expansion core that goes inside the handlebar. These can become damaged in a crash or during installation or uninstallation.
Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Key features: - Adapter to fit Bontrager Race Lite Ergo Bar Ends to Bontrager Satellite Plus IsoZone Handlebars - Only compatible with the Bontrager Satellite Plus IsoZone Handlebar - For most other bar ends, use: Bontrager Satellite Plus IsoZone Bar End Adapter
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
$8.00 - $17.00
Shimano Deore XT M8000-GS Rear Derailleur Cage Plate
- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
For 3rd generation road shifters: SB-R5XX
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
Shimano XT RD-M786-GS Rear Derailleur Inner Cage Plate - "B" fit for XTR RD-M986-GS, Deore RD-M615-GS, RD-M610-GS - OEM inner cage plate for XT RD-M786-GS, SLX RD-M675-GS
RockShox Reverb Hose Parts
- Securely hide your Di2 Battery within your seatpost - Di2 battery sold separately
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm
$9.99 - $15.99
Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.
- CNC machined aluminum alloy - Fits 26.8mm (1-1/8-inch) steer tube
$9.99 - $10.49
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$9.99 - $10.99
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$9.99 - $10.99
This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$9.99 - $19.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$9.99 - $11.99
Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.
$9.99 - $15.90
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
$9.99 - $19.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells. - Use this kit to install these SRAM and Quarq BB30 road cranks in BB386 frames: Force 22, S900, S950, Red power meter, DZero Carbon, DFour, Elsa, Riken
Red eTap battery terminal cover
One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.
Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
Shimano Deore XT M8000 chainring bolts. - Color: Black - Material: Aluminum - Type: Torx
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
RockShox Reverb External Parts include clamp nuts, bolts only
$11.99 - $13.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars. - Required for bar end use on Satellite Plus Isozone bars - For use with clamp style bar ends - Includes 2 adapters and 2 rubber handlebar inserts. - Bar end sold separately
The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)
Page 1 of 6 Next page