Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$44.95
The Tanpan brings the range and security of Shimano mountain rear derailleurs to Shimano-equipped drop-bar bicycles. This means a greater gearing range for bigger adventures, better chain security for rough terrain, and lighter weight and reduced complexity for the daily commute. In order to deliver these benefits, the Tanpan amplifies road shifter cable pull to allow for seamless communication with mountain derailleurs. The result is ideal for riders looking to convert their road, gravel, cyclocross, or commuter bike to the simplicity and light weight of a single chainring. - Not Compatible with Tiagra 4700 - Compatible with most road, CX and gravel bikes - Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs - Certain chainring and cassette configurations benefit from a Goatlink - If the rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule
$70.00
EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet
$17.99
Adapters to convert your flat mount fork to post mount calipers - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor - Each includes two bolts
$23.00
The Whisky compression plug for carbon forks is reliable and easy to use. The simple design offers excellent support and function, works great with Whisky carbon forks, and may fit other manufacturer's forks as well.
$95.00
ELEVENSIX coils are precision manufactured at HyperCo's state-of-the-art USA facility and available in 25lb/in increments for uncompromising setup. Each HyperCoil suspension spring is individually inspected, and laser marked with size and rate information for the ultimate in accuracy!
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer - Tool interface - 4mm hex key
$9.99 - $19.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$21.00
SRAM Caliper Brake Adjusting Barrel with Nut and Cable Fixing Assembly.
$17.99
Original equipment replacement rear derailleur hangers. Get back on the road with a quality replacement hanger. Product details - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications - Mounting location: Rear drive side - Attachment: 1-bolt
$53.96 - $60.00
Remote rebuild kits and subcomponents for Reverb and Reverb Stealth Posts.
$32.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing
$183.00
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update, it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top-level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. - The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests smaller increments of movement are achieved – making it simple to fine-tune a riders position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 50a extensions offer a 50° ski bend shape. The 50a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer - Tool interface - 4mm hex key
$81.00
Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1
$32.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$11.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$34.00
Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
$15.40
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame
$40.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$23.00
Disc Brake Adaptors - Includes Stainless Bolts
$55.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$20.00
Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells. - Use this kit to install these SRAM and Quarq BB30 road cranks in BB386 frames: Force 22, S900, S950, Red power meter, DZero Carbon, DFour, Elsa, Riken
$40.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$32.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$35.00
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for Dura-Ace R9100 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control
$1.99
Allows mounting of mono or duo Blendr Mount to Trek Madone SLR or one-piece Handlebar/Stem. - Corrosion resistant - Blends seamlessly