Pumps/Inflation

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.

The factory replacement for SILCA Press on Disc Chucks. The 252 replace the classic SILCA 25.1 gasket after more than 20 years in the market. This unique gasket borrows from industries which require air-tight seals in the harshest of environments. The 252 gasket utilizes a high tech, full synthetic elastomer base material. It tests to a life expectancy of more than 5X the carbon filled rubber or Buna-N materials used previously. In tests with a major disc wheel manufacturer, the current SILCA Disc Wheel Adapter with 252 gasket excelled by posting a blow-off pressure of 393psi where other designs were unable to reach 120psi. Older versions of the SILCA Disc Wheel Adapter will still benefit for the new gasket, but have a lower hands-free max pressure.

Replacement gasket for the SILCA HIRO Chuck

Replacement gasket for reversible brass chucks, modern Impero Frame Pumps, and Pocket Impero

If you have a SILCA PISTA made since 1946, a SUPERPISTA since 1989, or any of the Impero Frame Pumps since 2015, it has a check valve assembly like this to ensure that air can only go in one direction

This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass

n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.

Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

Tattico is a highly efficient mini-pump with an ergonomic design that makes it easy to use in all conditions. - Tattico has 4 unique features: - Inverted Design: Tattico is designed backwards from most pumps. The hose and valving is hidden inside the inner tube rather than the outer cylinder delivering up to 10% more air per stroke compared to pumps of similar length. - Adaptable Cup Seal: Other pumps seal with o-rings which lose effectiveness as friction heat increases. The Tattico Adaptable Cup Seal grows with the tube, resulting in ultimate efficiency at all temperatures. - Hidden Heat Sink: There is a heat sink hidden at the end of the barrel which absorbs a high percentage of the heat generated when pumping. This keeps the rest of the pump cool, even at high pressures. - Twin Tube Insulated Grip: Tattico handle uses 2 thin tubes separated by an insulating air gap to keep hands cool. This results in better grip and control without risk to hands even when inflating multiple tires to high pressures. - 6061 Alloy barrel and gripping surfaces - High-efficiency piston design - Long extractable filler hose with locking Presta/Schrader chuck - 120psi - 9-1/2" length - Includes direct-mount bracket with retaining strap

Originally designed in the 1950s when the Bianchi-Pirelli team requested a pump that could fit under the rear seat of the Fiat team car, the Pista pump quickly became an icon of professional team cars and mechanic workstations at 6-Day track events around the world. The compact form of the pump, and the ability to lay completely flat, allow the pump to take up minimal space in a trunk, duffel bag, or larger tool kit, making it a true icon of the sport amongst the cycling cognoscenti. In 2017, we took all of the qualities of the original Pista and introduced a re-engineered, limited-edition version of the pump with the iconic Molteni orange barrel to celebrate 100 years in business. These modern orange pumps were initially meant to be a limited-release product to celebrate our heritage, but the positive response and demand for the product have continued. As we're now in our second century of making high-performance pumps, we're pleased to make Pista part of our permanent floor pump line-up and will offer it in a modern red livery moving forward. - Durable, high-strength steel barrel - Compact ash wood handle with hose guides - High-efficiency SILCA leather piston assembly - Brass check-valve assembly - Long filler hose with integrated Schrader chuck - Push-on alloy Presta chuck with bleeder valve - Rated to 220psi

Pista Plus is a floor pump that's built to outlast the rest of your cycling equipment. The durable steel barrel, 3mm-thick leather plunger piston design, combined with our proprietary brass air bridge and check-valve assembly ensure unrivaled longevity. The smaller-diameter barrel matched with the superior pumping efficiency of our classic 28mm 731 model Italian leather piston gasket and self-lubricating linear bearings means that Pista Plus is capable of easily reaching pressures up to 220 PSI. Pista Plus features a three-footed aluminum base and a full-size lathe-turned ash handle. The chuck dock on Pista Plus secures the chuck at the Schrader chuck allowing the rider to swap the standard chuck out for our HIRO chuck or Disc Wheel Adapter while retaining the ability to secure the hose to the pump. The large 64mm gauge is accurate to 2% and features a high-contrast face design. - Durable, high-strength steel barrel - Full-size lathe-turned ash wood handle with hose guide - High-efficiency SILCA leather piston assembly - Brass air bridge and check-valve assembly - 2% Accurate, heavy-duty 2.5" (64mm) gauge rated to 220PSI - Integrated Schrader chuck plus press-on alloy Presta chuck with Bleeder valve

With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest-efficiency, smoothest-running SuperPista to date. Efficient, accurate, durable are the trademarks of the SuperPista floor pump. - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm, and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with a secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with a magnetic dock - Rated to 220psi

While "good enough" gets the job done, there is beauty in going above and beyond. The SILCA SuperPista Ultimate is the pinnacle of what a floor pump can achieve. From the highly accurate analog gauge to the magnetic HIRO dock to the lathe-turned Purpleheart wood handle, this floor pump embodies the SILCA mantra of passion, precision, performance. - Full Stainless Steel, Aluminum, Wood and Brass Construction—NO PLASTICS - SILCA Lifetime PLUS Shield Warranty—the most comprehensive warranty in all of Cycling - Ergonomic Purpleheart wood and Investment Cast Stainless Steel Handle - Full IGUS Linear Bearings for Ultimate Smoothness - Thick Full Grain Leather Piston Gasket—More Efficient and Durable than Rubber! - 1% Gauge Accuracy allows for Ultimate Ride Tuning

Don't let this diminutive pump fool you: SKS' Airboy has big lungs and it's ready to fill your tires quickly. Light and tough, this high-pressure pump fits in your jersey pocket easily and fills your tires up to 115 psi. The unique 2-chamber/2-plunger pumping system provides high pumping efficiency so you get back to your ride quicker. And, at only 62 grams, you'll forget you have this little bad boy when you're not using it.

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere. And it handles an astounding 600 psi max.

RockShox simplifies your pack with this HP 2-Stage Air Pump. Throw it in your pack for every ride and you have both a shock and tire pump that boasts a 300psi capacity. The aluminum construction makes it super durable and the head fits both presta and Schrader valves. A large removable gauge is easy to read and the air-release button makes fine tuning pressure in shocks and tires a breeze. And it includes a mounting clip to mount to water bottle bosses.

Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.

TyreWiz is the first-of-its-kind tire pressure sensor for riders of mountain bikes and road bikes. Lightweight, durable, and powered by a long-lasting user-replaceable coin cell battery, TyreWiz monitors air pressure in real-time and relays the data to a cycling computer or a smartphone. The TyreWiz app uses that data to deliver personalized recommendations and pressure alerts. For the first time, riders have access to highly accurate real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort. - TyreWiz is the first real-time tire pressure sensor for bicycle riders - Designed for all bike riders, regardless of their experience or bike’s intended use - Works with any tire that uses a removable Presta-style valve core: both tube and tubeless, and tires with anti-flat sealant - Data can be read on a cycling computer or smartphone with the app for iOS and Android - Smartphone app displays personalized recommendations, current tire pressure, and low/high-pressure alerts - Retail package includes two sensors, batteries, and a valve core removal tool - Use it for every ride to find the perfect combination of tire, wheel, and pressure in changing terrain and conditions - Include LED lights to indicate when pressure is outside the target range - Designed for road and mountain bike riders - Personalized tire recommendations in the smartphone app for iOS and Android - NFC pairing for fast and easy connection by BLE to a phone - Data reported with +/- 2% accuracy at .1 PSI resolution - Broadly compatible with tires that use a removable Presta-style valve core - Inexpensive, user-replaceable CR1632 battery lasts for 300 hours - IPX7 dustproof/waterproof rating - Box includes valve core removal tool for installation

Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads

Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.

Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.

Planet Bike's Ozone ATB Comp Mini-Pump is a ride-saver. For easy pumping and fast fills, it boasts a locking T handle, an easy pumping action and a thumblock head (with a cap to keep the mud out). This great inflator fits all valves and is small enough to carry in a pack or pocket, or you can use the included frame mount.

Planet Bike's Ozone ATB AL Mini-Pump is a ride-saver. For easy pumping and fast fills, it boasts a sturdy aluminum barrel, a locking T handle, an easy pumping action and a thumblock head (with a cap to keep the mud out). This great inflator fits all valves and is small enough to carry in a pack or pocket, or you can use the included frame mount.

Our Black Zeppelin CO2 bike inflator is ultra-lightweight, sleekly designed, and easy to use. It’s precision-machined for strength and reliability. The pierce indicator on the Airflation control knob lets you know when the cartridge has been punctured and the device is ready to inflate your bicycle tire. It accepts all types of threaded cartridges and works with Presta and Schrader valves without the need for an adaptor. It'll make quick and accurate work of road side repairs so stash it in your bike bag or jersey pocket and away you ride. - Precision-machined body and head for improved reliability and ease of use - CO2 pierce indicator reveals when CO2 cartridge is punctured and ready for use - Fits Presta and Schrader valves without adapters - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 45 x 32 x 21 mm - Weight: 24 grams (without CO2 cartridge)

-High Volume Telescoping alloy barrels with high-pressure and high volume modes -Autohead fits Presta or Schrader valves without converting -Ergonomic T-handle for maximum pumping efficiency -Ultra compact design fits into many seat packs or jersey pockets -Includes mounting bracket -Rebuildable