Filter By:
Parts & Accessories
$3.59
Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights
$3.59
Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.
$3.59
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
$3.99
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.
$4.99
Product details:
- Fits all Flare tail lights
- Works best with 27.2 - 31.6mm seatposts
- Includes 16-degree offset for optimized use on seatposts
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light
- Designed specifically for aero seat posts
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal
$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
Not compatible with omega 300 and sentry aero 260 tail lights.
$9.95
Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface.
- Compatible with Ranger, Expilion, Metro, and Streak series
- Includes adapter piece only
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.
System Compatibility:
- Lumina Series
- Mako Series
- MiNewt Cordless Series
$9.99
If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
SYSTEM COMPATIBILITY
- PRO Series
Not compatible with Lumina Pro lighting systems
$9.99
If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
System Compatibility
- Lumina Series
- Mako Series
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
$10.95
- Installs under the seat for a low profile, less cluttered appearance
- Easy to install and stays secure in all terrain
- Clamps to most two-rail bicycle saddles
- Use with Cygolite Hypershot and Hotshot tail lights
- Can also be used with GoPro compatible interface
- Premium plastic for strong durability
- Only weighs 23 grams
- Less prone to scratching bikes compared to metal mounts
- Tail light secures to mount without removing from saddle rails
- Designed, engineered, and assembled in the USA
$11.99
This lightweight bicycle handlebar and accessory mount adapter allows for the perfect placement of your mirror, bell or light. Lightweight and sleek design prevents your handlebar from becoming too cluttered.
- Made from hi-tech resin and aluminum alloy
- Lightweight accessory holder for handlebar end
- Ideally paired with a bell, light or mirror
- Works with both road and MTB bars
- Minimalist design that does not clutter your bike
$12.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm.
SYSTEM COMPATIBILITY
- Lumina Series
- MiNewt Cordless Series
- Mako Series
WARRANTY
- This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$13.95
Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems.
- Includes: helmet bracket, velcro strap, and foam pad.
$14.95
2nd generation Locktite™ tool-free handlebar bracket mount for Ranger, Expilion, Metro Pro and Plus, Metro, Streak and Pace systems. Compatible with 22 to 32mm diameter handlebars.
$15.95
- Fits 25.4 to 35mm handlebars.
- Wide range compatibility designed for standard and larger diameter handlebars.
- Easy to install and stays secure in rough terrain.
- Compatible lights: Ranger Endurance, Ranger, Metro Pro, Metro Plus, Metro, Streak
- Durable and convenient.
- Premium plastic for strong durability.
- Quick release feature makes removing the light quick and easy.
- Designed, engineered, and assembled in the USA to ensure top-quality mounts for your light.
$15.99
Where your gaze goes, your light follows
Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights.
- Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash
$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash
$19.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns.
System Compatibility:
- Lumina Series
- MiNewt Mini Series
- Mako Series
$19.99
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light!
System Compatibility
- Lumina Series
- MiNewt Mini Series
- Mako Series
$19.99
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights.
System Compatibility
- Pro Series
- HID Series
- Classic Plus & Select
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems
$29.99
AC adapter for NiteRider Pro 2200 Race, Pro 1800 Race, Pro 1200 Race, MiNewt Pro 770 Enduro, MiNewt Pro 750, TriNewt, TriNewt Wireless and all MiNewt Series bike lighting systems.
Please note: Style and color may vary
SYSTEM COMPATIBILITY
- Pro 2200 Race
- Pro 1800 Race
- Pro 1400 Race
- Pro 1200 Race
- MiNewt Pro 770 Enduro
- MiNewt Pro 750
- TriNewt
- TriNewt Wireless
- MiNewt Series
$29.99
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm.
System Compatibility:
- Pro Series
- HID Series
- Classic Plus & Select
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems
$34.99
Welcome to the future
The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights.
The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more.
- Transmitr remote can simultaneously control up to 7 lights
- ANT+ enabled for use with all Transmitr products
- Use Transmitr system for wireless on/off, mode selection, and more
- Can be used with multiple Flare RT lights for turn signal configuration
- Includes CR2032 battery, mount, and quick-start manual
$124.99
Trek CHRGtime Charging Station offers a better way to charge your cycling electronics by eliminating cable clutter.
MORE CHARGE. LESS CLUTTER.
Trek CHRGtime Charging Station is a better way to charge all of your cycling accessories. Neatly charge up to six cycling lights, computers, and devices in a refined enclosure that tidies up your charging area and keeps the included USB and USB-C charging cables tucked away and hidden from view.
PRODUCT DETAILS
- A clean, organized charging solution for cycling electronics
- Stores and charges up to six cycling electronics
- Single outlet cord and hidden charging cables reduce clutter
- Visible LED charging indicators make it quick and easy to see charge status
- Escape port allows for external charging of phones, tablets, or other accessories
- Removable divider tray allows for use with larger accessories
- Included stickers add custom flare and help align cables to the LED indicators
- Includes power cord and six charging cables: 3x USB-C and 3x USB-micro
Page 1 of 1